Designed specifically for bicycles, Chris King made-in-house bearings are built to last a lifetime, fully serviceable, and backed by our lifetime built-to-last warranty.
Now, after making the very best pressed-in headsets for over 40 years, Chris King is releasing the DropSet™ 1, the first Chris King integrated headset. This project started from the ground up, beginning with testing to analyze the forces at play in an integrated vs a pressed-in headset design, and discovering the unique problems that needed to be addressed.
The most significant challenge to overcome is that integrated bearings are not pressed into a cup and sit loosely in the frame. When bearings are not pressed securely into a cup they shift and move, rapidly losing preload. As preload drops, the bearings are more susceptible to creaking, damage, and failure.
When tested under normal riding conditions, the DropSet™ 1 with GripLock™ retains significantly more preload than the competition! The benefit is even more dramatic when heavy braking and big hits are encountered. Our griplock design also takes the guessing out of preloading a headset. Because the bearing preload force is independent of the clamping force, our headsets can be preloaded to a torque spec. No more guessing and under preloading the bearings
The DropSet™ 1 is backed by the same lifetime warranty as all King headsets, built on the knowledge we’ve gleaned from the last 40 years of making our own bearings.
Additionally the DropSet™ 1 is available in steel or ceramic bearings. This is the first time that we have offered a ceramic bearing headset. With the increased abuse that an integrated headset must endure we aim to provide every possible advantage. Ceramic is a self lubricating and non-galling material that will be even more durable in wet and corrosive conditions than our legendary stainless steel bearings. These durable properties will decrease service intervals and increase longevity in even the most abrasive riding conditions.
We made this first DropSet™ 1 an IS41/28.6 Upper, IS52/40 Lower. With a plenitude of shifting and abandoned integrated bearing sizes in the market, it was not an easy decision. To decide which bearings we should make we turned to brands that have held to reliable specifications and used them across their lines making it easier for bike shops to support and consumers to find what they need. Santa Cruz, Yeti, and Alchemy are all brands that have held to component standards making it easy for consumers and shops. All three use the IS41/28.6 Upper, IS52/40 Lower with 45 degree bearing seat headsets on their bikes with integrated headsets making them a perfect match for the DropSet 1.
To top off the performance a durability benefits, the DropSet™ 1 is available in all of our beautifully anodized colors and finishes. With the launch of this headset we are excited to bring our renowned quality and reliability to integrated headsets.